WIFI Telemetry module for Pixhawk Flight Controller

2.4G Wireless Wi-Fi Telemetry Module With Antenna For Pixhawk APM MiniAPM Flight Controller

It support Mobile Computer and can replace the 3DR data transmission module and free you from the limitation of USB cable.
It is suitable for all flight control with TTL interface.

Range:-
More Than 100 meter Range open Field

Wireless Module:-
FCC compliant
Wi-Fi standard: 802.11 b/g/n
Frequency Range: 2.4G-2.5G (2400M-2483M)
Size: 18.5 x 26mm
Suitable For: Pixhawk, APM2.5/2.6, Mini APM

Transmit power:
- 802.11 b: +20dBm
- 802.11 g: +17dBm
- 802.11 n: +14dBm

Receive power:
- 802.11 b: -91dBm (11Mbps)
- 802.11 g: -75dBm (54Mbps)
- 802.11 n: -72dBm (MCS7)

Connect data:
- SSID: Velocity-i2
- Code: ardupilot
- Ground IP: 192.168.4.1
- Protocol: UDP
- Board rate: 57600

Usage:
1. Directly insert in the flight control's data transmission port. When powered , there will be a Wi-Fi named APMWIFI, the password is ardupilot. If connect successfully, it will distribute you an IP address192.168.4.2.
2. Turn on ground station software, set connect as UDP protocol, 57600 Board rate, 14500 connect port.